Oil Filter M10103520
Oil Filter M10103520 for Hino — OE 15607-1590. Direct-fit aftermarket replacement, factory direct, MOQ 50 pcs per part number.
Product Overview
This oil filter is a direct-fit replacement for Hino applications and carries part number TTO-0151. It is manufactured from high-density cellulose/synthetic blend filter media, steel end caps, an anti-drain-back silicone valve, a nitrile rubber sealing gasket and a zinc-plated steel housing. The oil filter traps metal particles, carbon soot and sludge from the engine oil, protecting the bearings, crankshaft and turbocharger from abrasive wear.
Published OE references: 15607-1590, 15607-1671, 15607-1780.
Dimensional data: Largest OD 110.5mm; Overall Height 159.5mm; Thread Size 1-1/2-12UNF.
Key Features
Typical Applications
Screw-on spin-on canister — the thread size and gasket diameter must match the filter head exactly. Never substitute a filter with a different thread pitch even if the canister looks similar.
Applications and Selection Guide
Use the available OE and product data below to shortlist this part, then confirm final fitment before ordering.
| Selection point | Oil Filter M10103520 option | What the project must confirm |
|---|---|---|
| Product code | M10103520 | Match the requested part number and version |
| OE references | 15607-1590,15607-1671,15607-1780 | Check the original part number and cross-reference |
| Vehicle references | HINO | Confirm model, year, engine and market |
| Dimensions | Diameter: 110.5mm, Height: 159.5mm | Compare the current drawing or approved sample |
| Thread / interface | 1-1/2-12UNF | Compare the fitting interface with the approved part |
OE Reference
Compare the original part number and any published cross-references with the required vehicle part.
Vehicle Application
Confirm vehicle model, engine, production year and destination market before ordering.
Dimensions and Interface
Check the product drawing, measurements and connection or thread details.
Order Configuration
Agree on quantity, marking, packaging and documents for the approved product.
Ordering Guide
- Specify product code M10103520.
- Provide the original part number and vehicle information.
- Confirm dimensions, thread or interface against the drawing or sample.
- State target quantity, branding, packaging and destination market.
- Request a quotation and sample for final approval.
Fitment and Quality Checks
- Verify the original part number and approved cross-reference.
- Compare dimensions and connection details with the current drawing.
- Confirm the vehicle application and any market-specific requirements.
- Review samples, marking and packaging before the production order.
Technical Specifications
| Parameter | Published product data |
|---|---|
| Product code | M10103520 |
| Product category | Oil Filters |
| OE references | 15607-1590,15607-1671,15607-1780 |
| Diameter | 110.5mm |
| Height | 159.5mm |
| Thread | 1-1/2-12UNF |
| Vehicles | HINO |
Product Matching Checklist
| Item | Buyer information | Makexcar review |
|---|---|---|
| OE reference | Original part number | Cross-reference and sample check |
| Vehicle | Model, year and engine | Application confirmation |
| Dimensions | Drawing or existing part | Measurement comparison |
| Order | Quantity and destination | Packaging and document review |
Final fitment must be confirmed against the current specification and approved sample.
Order Information
| Requirement | Details to provide |
|---|---|
| Product | M10103520 |
| Part reference | 15607-1590,15607-1671,15607-1780 |
| Application | HINO |
| Commercial terms | Quantity, destination and packaging requirements |
Why Choose Makexcar
Published manufacturing standard: ISO 4548-1, ISO 4548-2 and SAE J806. Request current product documents and samples for the ordered configuration.
50
MOQ
Pieces per part number
15–25
LEAD TIME
Working days after deposit
OE
PART MATCHING
Check published OE references
NEW
CONDITION
New replacement component
Automated Production
Testing Equipment
Packaging Review
Quality Inspection
What Can We Customize?
Private label, custom packaging, barcode and OEM numbering available from 500 pcs per part number
Logo & Branding
Private-label marking and artwork are subject to sample approval.
Packaging Customization
Discuss boxes, labels, manuals and cartons for the destination market.
Product Specification
Review the approved part specification and available options.
Product Appearance
Discuss appearance and marking for the approved product configuration.
Documentation Support
Request available drawings, test data and management certificates.
Engineering Review
Provide a sample or drawing for matching and project feasibility review.
Oil Filter M10103520 Product FAQ
What does this product code identify?
Product code M10103520 is used for quotation and document requests.
How do I confirm fitment?
Screw-on spin-on canister — the thread size and gasket diameter must match the filter head exactly. Never substitute a filter with a different thread pitch even if the canister looks similar.
What measurements should I check?
Compare the published dimensions and interface with the existing part.
Are private-label orders available?
Branding and packaging can be reviewed against the approved specification and quantity.
Can I request a sample?
Send the product code, target quantity and destination market through the contact form.
What technical documents are available?
Ask Makexcar for current drawings, product data and available test documents for your configuration.
Confirm the Right Oil Filter M10103520
Send the part reference, vehicle application, quantity and packaging requirements for review.
