Control Arm 54500-38620 M30600254
Control Arm 54500-38620 (M30600254) for 东风悦达起亚 OPTIMA，起亚 MAGENTIS (GD)，现代 SONATA III (EF) — OE 54500-38620. Factory-direct control arm, MOQ 50 pcs per part number.
Product Overview
This control arm is a direct-fit replacement for 东风悦达起亚 OPTIMA，起亚 MAGENTIS (GD)，现代 SONATA III (EF) and carries the factory part number 54500-38620. It is manufactured by Yuhuan Fujia Machinery, a Zhejiang chassis-parts specialist that supplies control arms, ball joints, tie rod ends, rack ends and stabilizer links to the independent aftermarket in North America, Europe and the Middle East.
Published OE reference: 54500-38620.
Applications listed by the factory: 东风悦达起亚 OPTIMA，起亚 MAGENTIS (GD)，现代 SONATA III (EF).
Positions: Front Axle, Left, Lower.
Key Features
Typical Applications
Fitment note: Match the OE number first, then verify the taper diameter, the stud or thread size and the overall length. Choose the same handed left/right part as the factory fitment — a handed part cannot be swapped side to side. Replace both sides at the same time when one is worn, because they share the same duty cycle.
Applications and Selection Guide
Use the available OE and product data below to shortlist this part, then confirm final fitment before ordering.
| Selection point | Control Arm 54500-38620 M30600254 option | What the project must confirm |
|---|---|---|
| Product code | M30600254 | Match the requested part number and version |
| OE references | 54500-38620 | Check the original part number and cross-reference |
| Vehicle references | 东风悦达起亚 OPTIMA，起亚 MAGENTIS (GD)，现代 SONATA III (EF) | Confirm model, year, engine and market |
| Dimensions | On request | Compare the current drawing or approved sample |
| Thread / interface | Confirm by drawing | Compare the fitting interface with the approved part |
OE Reference
Compare the original part number and any published cross-references with the required vehicle part.
Vehicle Application
Confirm vehicle model, engine, production year and destination market before ordering.
Dimensions and Interface
Check the product drawing, measurements and connection or thread details.
Order Configuration
Agree on quantity, marking, packaging and documents for the approved product.
Ordering Guide
- Specify product code M30600254.
- Provide the original part number and vehicle information.
- Confirm dimensions, thread or interface against the drawing or sample.
- State target quantity, branding, packaging and destination market.
- Request a quotation and sample for final approval.
Fitment and Quality Checks
- Verify the original part number and approved cross-reference.
- Compare dimensions and connection details with the current drawing.
- Confirm the vehicle application and any market-specific requirements.
- Review samples, marking and packaging before the production order.
Technical Specifications
| Parameter | Published product data |
|---|---|
| Product code | M30600254 |
| Product category | Control Arms |
| OE references | 54500-38620 |
| Position | Front Axle, Left, Lower |
| Vehicles | 东风悦达起亚 OPTIMA，起亚 MAGENTIS (GD)，现代 SONATA III (EF) |
Product Matching Checklist
| Item | Buyer information | Makexcar review |
|---|---|---|
| OE reference | Original part number | Cross-reference and sample check |
| Vehicle | Model, year and engine | Application confirmation |
| Dimensions | Drawing or existing part | Measurement comparison |
| Order | Quantity and destination | Packaging and document review |
Final fitment must be confirmed against the current specification and approved sample.
Order Information
| Requirement | Details to provide |
|---|---|
| Product | M30600254 |
| Part reference | 54500-38620 |
| Application | 东风悦达起亚 OPTIMA，起亚 MAGENTIS (GD)，现代 SONATA III (EF) |
| Commercial terms | Quantity, destination and packaging requirements |
Why Choose Makexcar
Published manufacturing standard: IATF 16949 and ISO 9001 production; every unit is proof-load tested and checked before packing. Request current product documents and samples for the ordered configuration.
50
MOQ
Pieces per part number
15–25
LEAD TIME
Working days after deposit
OE
PART MATCHING
Check published OE references
NEW
CONDITION
New replacement component
Automated Production
Testing Equipment
Packaging Review
Quality Inspection
What Can We Customize?
Private label, custom packaging, barcode and OEM numbering available from 500 pcs per part number
Logo & Branding
Private-label marking and artwork are subject to sample approval.
Packaging Customization
Discuss boxes, labels, manuals and cartons for the destination market.
Product Specification
Review the approved part specification and available options.
Product Appearance
Discuss appearance and marking for the approved product configuration.
Documentation Support
Request available drawings, test data and management certificates.
Engineering Review
Provide a sample or drawing for matching and project feasibility review.
Control Arm 54500-38620 M30600254 Product FAQ
What does this product code identify?
Product code M30600254 is used for quotation and document requests.
How do I confirm fitment?
Fitment note: Match the OE number first, then verify the taper diameter, the stud or thread size and the overall length. Choose the same handed left/right part as the factory fitment — a handed part cannot be swapped side to side. Replace both sides at the same time when one is worn, because they share the same duty cycle.
What measurements should I check?
The source catalogue does not publish exterior dimensions for this part; match the OE number and vehicle application, then request a drawing or sample.
Are private-label orders available?
Branding and packaging can be reviewed against the approved specification and quantity.
Can I request a sample?
Send the product code, target quantity and destination market through the contact form.
What technical documents are available?
Ask Makexcar for current drawings, product data and available test documents for your configuration.
Confirm the Right Control Arm 54500-38620 M30600254
Send the part reference, vehicle application, quantity and packaging requirements for review.
