Ball Joint 78MU3263A M30600004
Ball Joint 78MU3263A (M30600004) for RENAULT R12 1971-1977 / RENAULT R15 1972-1976 / RENAULT R17 1972-1979 — OE 78MU3263A. Factory-direct ball joint, MOQ 50 pcs per part number.
Product Overview
This ball joint is a direct-fit replacement for RENAULT R12 1971-1977 / RENAULT R15 1972-1976 / RENAULT R17 1972-1979 and carries the factory part number XNB40005. It is manufactured by Taizhou ASSP Machinery, a Zhejiang suspension and steering specialist that supplies control arms, ball joints, tie rod ends, rack ends and stabilizer links to the aftermarket in North America and Europe.
Published OE reference: 78MU3263A.
Published technical data: Length: 67mm; Width: 60 mm; Height: 87mm; Material: Forged Steel.
Applications listed by the factory: RENAULT R12 1971-1977 / RENAULT R15 1972-1976 / RENAULT R17 1972-1979.
Key Features
Typical Applications
Fitment note: Match the OE number first, then verify the taper diameter, the stud or thread size and the overall length. A joint or arm with the correct taper but the wrong stud length will not seat, and a handed left/right part cannot be swapped. Check the opposite side of the vehicle at the same time — if one joint is worn, the other is usually on the same duty cycle.
Applications and Selection Guide
Use the available OE and product data below to shortlist this part, then confirm final fitment before ordering.
| Selection point | Ball Joint 78MU3263A M30600004 option | What the project must confirm |
|---|---|---|
| Product code | M30600004 | Match the requested part number and version |
| OE references | 78MU3263A | Check the original part number and cross-reference |
| Vehicle references | RENAULT R12 1971-1977 / RENAULT R15 1972-1976 / RENAULT R17 1972-1979 | Confirm model, year, engine and market |
| Dimensions | Length: 67mm, Width: 60 mm, Height: 87mm | Compare the current drawing or approved sample |
| Thread / interface | Confirm by drawing | Compare the fitting interface with the approved part |
OE Reference
Compare the original part number and any published cross-references with the required vehicle part.
Vehicle Application
Confirm vehicle model, engine, production year and destination market before ordering.
Dimensions and Interface
Check the product drawing, measurements and connection or thread details.
Order Configuration
Agree on quantity, marking, packaging and documents for the approved product.
Ordering Guide
- Specify product code M30600004.
- Provide the original part number and vehicle information.
- Confirm dimensions, thread or interface against the drawing or sample.
- State target quantity, branding, packaging and destination market.
- Request a quotation and sample for final approval.
Fitment and Quality Checks
- Verify the original part number and approved cross-reference.
- Compare dimensions and connection details with the current drawing.
- Confirm the vehicle application and any market-specific requirements.
- Review samples, marking and packaging before the production order.
Technical Specifications
| Parameter | Published product data |
|---|---|
| Product code | M30600004 |
| Product category | Ball Joints |
| OE references | 78MU3263A |
| Length | 67mm |
| Width | 60 mm |
| Height | 87mm |
| Material | Forged Steel |
| Vehicles | RENAULT R12 1971-1977 / RENAULT R15 1972-1976 / RENAULT R17 1972-1979 |
Product Matching Checklist
| Item | Buyer information | Makexcar review |
|---|---|---|
| OE reference | Original part number | Cross-reference and sample check |
| Vehicle | Model, year and engine | Application confirmation |
| Dimensions | Drawing or existing part | Measurement comparison |
| Order | Quantity and destination | Packaging and document review |
Final fitment must be confirmed against the current specification and approved sample.
Order Information
| Requirement | Details to provide |
|---|---|
| Product | M30600004 |
| Part reference | 78MU3263A |
| Application | RENAULT R12 1971-1977 / RENAULT R15 1972-1976 / RENAULT R17 1972-1979 |
| Commercial terms | Quantity, destination and packaging requirements |
Why Choose Makexcar
Published manufacturing standard: IATF 16949 and ISO 9001 production; every unit is proof-load tested and checked before packing. Request current product documents and samples for the ordered configuration.
50
MOQ
Pieces per part number
15–25
LEAD TIME
Working days after deposit
OE
PART MATCHING
Check published OE references
NEW
CONDITION
New replacement component
Automated Production
Testing Equipment
Packaging Review
Quality Inspection
What Can We Customize?
Private label, custom packaging, barcode and OEM numbering available from 500 pcs per part number
Logo & Branding
Private-label marking and artwork are subject to sample approval.
Packaging Customization
Discuss boxes, labels, manuals and cartons for the destination market.
Product Specification
Review the approved part specification and available options.
Product Appearance
Discuss appearance and marking for the approved product configuration.
Documentation Support
Request available drawings, test data and management certificates.
Engineering Review
Provide a sample or drawing for matching and project feasibility review.
Ball Joint 78MU3263A M30600004 Product FAQ
What does this product code identify?
Product code M30600004 is used for quotation and document requests.
How do I confirm fitment?
Fitment note: Match the OE number first, then verify the taper diameter, the stud or thread size and the overall length. A joint or arm with the correct taper but the wrong stud length will not seat, and a handed left/right part cannot be swapped. Check the opposite side of the vehicle at the same time — if one joint is worn, the other is usually on the same duty cycle.
What measurements should I check?
Compare the published dimensions and interface with the existing part.
Are private-label orders available?
Branding and packaging can be reviewed against the approved specification and quantity.
Can I request a sample?
Send the product code, target quantity and destination market through the contact form.
What technical documents are available?
Ask Makexcar for current drawings, product data and available test documents for your configuration.
Confirm the Right Ball Joint 78MU3263A M30600004
Send the part reference, vehicle application, quantity and packaging requirements for review.
