Air Suspension Compressor M20400003
Air Suspension Compressor M20400003 for Audi — OE 4E0616005E. Direct-fit aftermarket replacement, factory direct, MOQ 50 pcs per part number.
Product Overview
This air suspension compressor is a direct-fit replacement for Audi applications and carries part number 4E0616005E. It is manufactured from a die-cast aluminium cylinder head, a hardened steel piston and bore, a long-life DC motor with graphite brushes, thermal overload protection and an integrated air dryer. The air suspension compressor generates the compressed air that fills the air springs, supplying controlled pressure to raise and level the vehicle and to maintain the reservoir charge.
Published OE references: 4E0616005E, 4E0616005G, 4E0616007A, 4E0616007C, 4E0616007E.
Key Features
Typical Applications
Vehicle-specific bracket, connector and air outlet. Confirm whether the vehicle uses an internal or external dryer and whether the existing relay and valve block are reused.
Applications and Selection Guide
Use the available OE and product data below to shortlist this part, then confirm final fitment before ordering.
| Selection point | Air Suspension Compressor M20400003 option | What the project must confirm |
|---|---|---|
| Product code | M20400003 | Match the requested part number and version |
| OE references | 4E0616005E,4E0616005G,4E0616007A,4E0616007C,4E0616007E | Check the original part number and cross-reference |
| Vehicle references | Audi A8/S8 D3 4E 10/12cylinder(diesel engine) 2002-2010 | Confirm model, year, engine and market |
| Dimensions | On request | Compare the current drawing or approved sample |
| Thread / interface | Confirm by drawing | Compare the fitting interface with the approved part |
OE Reference
Compare the original part number and any published cross-references with the required vehicle part.
Vehicle Application
Confirm vehicle model, engine, production year and destination market before ordering.
Dimensions and Interface
Check the product drawing, measurements and connection or thread details.
Order Configuration
Agree on quantity, marking, packaging and documents for the approved product.
Ordering Guide
- Specify product code M20400003.
- Provide the original part number and vehicle information.
- Confirm dimensions, thread or interface against the drawing or sample.
- State target quantity, branding, packaging and destination market.
- Request a quotation and sample for final approval.
Fitment and Quality Checks
- Verify the original part number and approved cross-reference.
- Compare dimensions and connection details with the current drawing.
- Confirm the vehicle application and any market-specific requirements.
- Review samples, marking and packaging before the production order.
Technical Specifications
| Parameter | Published product data |
|---|---|
| Product code | M20400003 |
| Product category | Air Suspension Compressors |
| OE references | 4E0616005E,4E0616005G,4E0616007A,4E0616007C,4E0616007E |
| Vehicles | Audi A8/S8 D3 4E 10/12cylinder(diesel engine) 2002-2010 |
Product Matching Checklist
| Item | Buyer information | Makexcar review |
|---|---|---|
| OE reference | Original part number | Cross-reference and sample check |
| Vehicle | Model, year and engine | Application confirmation |
| Dimensions | Drawing or existing part | Measurement comparison |
| Order | Quantity and destination | Packaging and document review |
Final fitment must be confirmed against the current specification and approved sample.
Order Information
| Requirement | Details to provide |
|---|---|
| Product | M20400003 |
| Part reference | 4E0616005E,4E0616005G,4E0616007A,4E0616007C,4E0616007E |
| Application | Audi A8/S8 D3 4E 10/12cylinder(diesel engine) 2002-2010 |
| Commercial terms | Quantity, destination and packaging requirements |
Why Choose Makexcar
Published manufacturing standard: IATF 16949 and ISO 9001, thermally and endurance cycle tested. Request current product documents and samples for the ordered configuration.
50
MOQ
Pieces per part number
15–25
LEAD TIME
Working days after deposit
OE
PART MATCHING
Check published OE references
NEW
CONDITION
New replacement component
Automated Production
Testing Equipment
Packaging Review
Quality Inspection
What Can We Customize?
Private label, custom packaging, barcode and OEM numbering available from 500 pcs per part number
Logo & Branding
Private-label marking and artwork are subject to sample approval.
Packaging Customization
Discuss boxes, labels, manuals and cartons for the destination market.
Product Specification
Review the approved part specification and available options.
Product Appearance
Discuss appearance and marking for the approved product configuration.
Documentation Support
Request available drawings, test data and management certificates.
Engineering Review
Provide a sample or drawing for matching and project feasibility review.
Air Suspension Compressor M20400003 Product FAQ
What does this product code identify?
Product code M20400003 is used for quotation and document requests.
How do I confirm fitment?
Vehicle-specific bracket, connector and air outlet. Confirm whether the vehicle uses an internal or external dryer and whether the existing relay and valve block are reused.
What measurements should I check?
The source catalogue does not publish exterior dimensions for this part; match the OE number and vehicle application, then request a drawing or sample.
Are private-label orders available?
Branding and packaging can be reviewed against the approved specification and quantity.
Can I request a sample?
Send the product code, target quantity and destination market through the contact form.
What technical documents are available?
Ask Makexcar for current drawings, product data and available test documents for your configuration.
Confirm the Right Air Suspension Compressor M20400003
Send the part reference, vehicle application, quantity and packaging requirements for review.
